Fans-Heavy Duty
Canada Blower heavy duty axial and centrifugal fans are
designed to handle applications involving erosive and
corrosive gases, large capacities; high pressures and
temperature extremes. Typical applications include air
cleaning systems, mechanical draft, chemical processes,
kiln exhaust, mine ventilation, gas recirculation,
sintering and cryogenic service.
To meet these operating conditions, Canada Blower heavy duty
fans are designed and selected with the use of modern
computer techniques guided by over 100 years of fan
engineering experience. Comprehensive testing con-firms design
decisions. Quality manufacturing standards guarantee long service life.
HEAVY DUTY CENTRIFUGAL FANS
Canada Blower heavy duty centrifugal fans are available with
airfoil, back-wardly curved, and radial tipped blade
wheels. Capacities run from 1,050 cfm to over 1,000,000
cfm, with pressures to 100″ W.G. Options and
accessories include sleeve or anti-friction bearings,
inlet boxes, inlet box dampers, gas-tight construction,
outlet dampers, wear strips, scroll liners and special
materials of construction.
HEAVY DUTY AXIAL FANS
Canada Blower heavy duty axial fans are available in
three basic designs. Types AP & AN are power
plant axials designed for larger fossil fuel boilers,
especially when reduced load requirements will be
encountered; Type MS Adjustax®axials are designed to
deliver high capacities (to 900.000cfm)and medium to
high pressures (to 20″ total pressure in single stage,
to 40″ total pressure in two stage) for a variety of
industrial process and ventilation applications.
REPAIR SERVICE -HEAVY DUTY FANS
When prolonged service wears a Canada Blower fan wheel the
logical replace-ment is a new Canada Blower wheel built to the
original design. Rated perfor-mance is assured.
A Canada Blower Sales Engineer will get you a replacement
wheel in the shortest time. He may also recommend
changes to extend service life and performance of
the replacement wheel. Replacement shafts, bearings,
accessories, etc., are also readily available.
Fans-Process
Three wheel designs make this a versa-tile exhauster.
The MW wheel handles dust, abrasives and/or corrosives.
The OW wheel is for fiberous materials. The AW wheel
provides maximum efficiency on clean air. Capacities to 85,000 cfrn.
Static pressure to 20″ W.G. Temperatures to 850°F.
Accessories and special materials of construction are available.
Canada Blower “FM” high pressure exhausters are rugged exhausters
preengineered in regard to ratings and construction detail.
They are designed for air or gas moving applications
with capacity requirements from 1,500 dm to 27,000 cfm.
Pressures range from 20″ W.G. to 40″ W.G. in eight sizes.
Fans-Special Materials
Canada Blower has for many years supplied air handling equipment in
materials selected to resist corrosion or erosion.
Today you can order certain Canada Blower fans in fiberglass
reinforced plastic (FRP), cast iron, aluminum, stainless
and most any other high alloy steel as well as with special
coatings and linings. These fans are based on performance
proven Canada Blower designs and built to Canada Blower quality standards.
Move large volumes of corrosive fumes with these
fiberglass rein-forced plastic ventilating fans.
Both the FL and type “B” Axial are proven designs.
FRP construction adds longevity to efficiency on
corrosive service. FL capacities from 900 to 129,000 cfm,
static pressures to 6″ W.G. Axial capacities from
2,000 to 60,000 cfm and static pressures to 3″ W.G.
RUBBER LINED EXHAUSTERS
Lined exhausters, introduced over 30 years ago,
are a good choice for many corrosive fume applications.
Based on your operating conditions, Canada Blower engineers will
suggest the correct fan to be rubber coated.
Contact your Canada Blower Sales Representative for details.
CB/OP BL AEROFOIL®
The Canada Blower BL-Aerofoil is a high
efficiency, low noise level fan for
quality, optimum design alr
conditioning and ventilation systems.
Construction features include wheel
blades that combine the best of
backward curved and air foil
designs … die-formed torusoidal
inlet bell and matching wheel flange
… heavier gauge steel and
adequate bracing … heavier shaft
and bearings … all put together with
traditional Canada Blower quality fabrication
and inspection. The Canada Blower
BL-Aerotoil is built in Class I, II and III construction in capacities from
III construction in capacities from
687 to 661,000 cfm and pressures
to 12″.
AXIAI FLOW FANS
Canada Blower Axial Flow Fans are a best
buy for many industrial air moving
jobs. Generally, an axial costs
considerably less than a quality
centrifugal fan delivering the same
volume and pressure. They cost less
to install since they are lighter,
requiring minimum structural
support. They can be duct mounted,
taking up little space. Direct drive
models mean faster start-up and the
absence of •beIt drive and fan
bearings lowers maintenance costs.
Adjustax AxlaIs feature an
adjustable pitch blade wheel that
permits matching your
pressure/volume requirements
exactly, and lets you make
on•the-job adjustments to
compensate for system changes.
Adjustax capacities from 3000 to
400,000 cfm, and to 20″ total
pressure.
Type “B” Axle’s have fixed blade
wheels in capacities from 2600 to
330,000 cfm and to 5″ total
pressure.
Canada Blower SWING OUT FANS
The Canada Blower Aerolinann Centrifugal
Inline and the Canada Blower Centrifugal
Tracked Swing Out”) fans are
efficient low noise level fans
designed for paint spray booth and
other applications where substance
build-up must be removed from the
fan interior. The entire rotating
assembly swings out to become
fully accessible for maintenance.
These units meet the need for large volumes of exhaust and supply air. volumes of exhaust and supply air. They feature a low silhouette, simple rugged construction to with- stand hurricane force winds and stand hurricane force winds and heavy snow loads, a wide choice of options and either belt or direct drive. Capacities to over 200,000 cfm and pressures to over 1″.
A low silhouette upblast style unit ruggedly built to withstand hurri- cane force winds. Direct or belt drive, propeller fan or axial fan type wheels. Can be mounted on flat or pitched roof. Several options are available, including “tilt-up” are available, including “tilt-up” design. Capacities to 130,000 cfm.
Canada Blower offers a line of propeller fans with many wheel designs to meet all applications. Construction is typical Canada Blower quality to meet industrial operating conditions. Options include bell or direct drive, penthouses, wall or ceiling shutters, wall boxes, filters, wire guards and penthouses, wall or ceiling shutters, wall boxes, filters, wire guards and wall boxes, filters, wire guards and spark resistant construction. Wheel sizes from 8″ to 120″. Capacities from 500 to 240,000 cfm and up to 1″ SP or higher.
A versatile, economical, efficient ventilating fan featuring Canada Blower proven backward curved blade wheel. This non-overloading limit- load horsepower fan is stable from free delivery to shut-off. Changing system resistance has little effect on capacity. Options include all- weather cover, damper, screen, heat stinger, shaft seal, drain, etc. Cap- acities from 600 to 24,000 cfm. pressures to 4″
A quiet, reliable fan with a sturdy corrosion resistant cast iron housing that is rotatable to obtain any 450 that is rotatable to obtain any 450 angular discharge. Widely used as a component on many industrial products. Features include all- weather cover, drain, non-spark aluminum wheel, heat slinger, anti- vibration pads, special corrosion resistant materials and/or protective coatings. Capacities from 47 to coatings. Capacities from 47 to 1765 cfm with pressures to 1″.
These small package units are used for small furnace draft, handling particles of wood, metal, and abra- sives in collecting systems, and sives in collecting systems, and many more jobs requiring moderate volume against low pressures. Cap- acities from 30 cfm to 700 cfm.